Tech Enabler

Austeng are a boutique engineering firm that specialises in the design, engineering, development and building of customised electromechanical machinery and systems.

MONASH UNIVERSITY – IMPACT TESTING FACILITY

Recent Projects, Tech Enabler

We are proud to have been involved as a key project partner in Monash University’s world leading impact testing equipment. Austeng engineered, manufactured and installed the state of the art Impact Testing Facility in line with the University’s stringent requirements. The research facility unveiled in December 2020 is designed to observe the behaviour of elements […]

Formflow – Innovating Metal Forming

Architecture, Tech Enabler, Various

FormFlow C90 Colorbond Lysaght Corrugated Iron Bend

Congratulations to Formflow on it’s continuing journey with its bending technology set to disrupt the construction industry. Austeng is delighted to be a part of the Formflow story. Formflow and Austeng has featured in Engineers Australia magazine ‘Create’ under the title “Mind Over Metal” relating to a new Australian metal forming innovation – see […]

Capricorn Power – Waste Heat Into Electricity

Recent Projects, Sustainability Projects, Tech Enabler

Capricorn Power Barton Waste Heat To Electricity Engine

Austeng has collaborated with Capricorn Power to run successful trials to support the technical development of what is potentially the world’s most efficient heat to electricity generation system, based on a theoretically proven flow-sheet. The “Barton Engine” turns customers waste heat into low cost electricity thereby reducing emissions. Applications include primary energy sources from renewables […]

Pioneer Commericial Graphene Plant

Recent Projects, Tech Enabler

Graphene Imagine Intelligent Materials Austeng Sarah Henderson

Austeng has collaborated with Imagine Intelligent Materials Pty Ltd (Imagine IM) in building the first commercial graphene plant in Australia. It was officially launched by local MP Sarah Henderson. The pilot plant will produce up to 10 tonnes of graphene per year, built for Imagine IM by Austeng. Graphene is a revolutionary two dimensional atomic […]

Pole Rebutting Truck – Adapt-a-pole

General Projects, Tech Enabler

Austeng has been working with Adapt-A-Pole Pty. Ltd. to refine their leading-edge pole rebutting technology. Pole rebutting replaces the in-ground portion of the timber pole with a steel and concrete stub and can be utilised for pole re-instatement, thermal up-grades, new installations and increasing conductor clearance. Advantages of this technology include economics, increased strength and […]

Multi-Scale Manufacturing For The Production of Short Nanofibres

Recent Projects, Tech Enabler

Austeng has successfully collaborated with local based bio-technology company Cytomatrix Pty Ltd and Deakin University to manufacture a world first manufacturing plant for the production of “novel” short nanofibres, a new class of high value materials that open up a side range of new applications in bio-technology, medicine, materials science and other fields). Austeng provided […]

Echo Whisper Wind Turnbine

Recent Projects, Sustainability Projects, Tech Enabler, Various

Over the last three years we have been working with the Renewable Energy Solutions Pty. Ltd. (RESA) team to develop, refine and manufacture their innovative, efficient and virtually silent Eco Whisper Turbine (EWT 625). This exciting new development in green energy is designed to off-set small to large energy requirements for manufacturing and industrial sites, […]

Curing Oven for Carbon Fibre Wheel

Tech Enabler

Carbon revolution Carbon Fibre Wheel Rim

Our client Carbon Revolution has developed a world first “one-piece” carbon fibre wheel that represents cutting edge in design and manufacture with composite materials resulting in attendant benefits and savings. See www.carbonrev.com. Austeng assisted in the commercialisation process by developing a cwww.carbonrev.comonvection cure over in high nitrogen/low oxygen environment that provided programmed cure cycle of gradually […]

Bird Repel Unit

Tech Enabler

Deakin University Austeng Bird Repellent Lighting Trailer

In early 2015 Austeng worked with Deakin University to develop a unit that harmlessly repels birds in certain environments. the intellectual property developed by a Deakin University animal behaviorist revolved around pulsing light at set frequencies. These flashing lights are seen by the birds but are at a frequency too high for the human eye […]

Austeng
Austeng Secures Funding to Demonstrate the Commercial Viability of Onsite Hydrogen Production and Blending.March 30, 2026 - 4:50 pm
– Austeng has received $500,000.00 in funding to lead a ground breaking project aimed at accelerating the use of renewable hydrogen in industrial applications which requires high temperatures. This funding has been provided by the Federal Australian government via the Go Green Co-Innovation Program . The initiative will develop and demonstrate a financially viable, […]
Austeng
Lifting The Line on their latest podcast episode, “Bridging the Gap Between Office and Tools”March 30, 2026 - 4:45 pm
Our Managing Director Ross George recently joined Aly and Andy from Lifting The Line on their latest podcast episode, “Bridging the Gap Between Office and Tools.” The conversation explored why bringing design thinking and practical engineering closer to those on the tools is essential. Real project outcomes aren’t shaped solely by drawings or models — […]
Austeng Secures Federal Funding to Demonstrate Onsite Hydrogen Production and BlendingMarch 26, 2026 - 1:44 pm
Austeng Secures Federal Funding to Demonstrate Onsite Hydrogen Production and Blending Austeng is pleased to announce that we have secured Federal Government funding to deliver a pioneering hydrogen project at our Geelong facility—focused on demonstrating the commercial viability of onsite hydrogen production and blending for industrial applications. This project will showcase how green hydrogen can […]